Perform OTA Update

[TCP <--> InvisOutlet]

Performing updates to the latest firmware for either InvisOutlet or InvisDeco.

Request

• packetID: Represents the ID of the packet. This can be any six digit number, no leading zeros.

• payload:

  • callbackName: 21

  • callbackArgs:

    • 0: Specifies which device to update; 1 - InvisOutlet, 2 - InvisDeco.

    • 1: Specifies which method to update InvisDeco; 0 - via Wi-Fi, 1 - via InvisOutlet

If you are having trouble using the via Wi-Fi method to update InvisDeco, please try to update InvisDeco via the via InvisOutlet method.

{
  "packetID": 414883,  
  "payload":
  {
    "callbackName": 21,  
    "callbackArgs": [1,0] 
  }
}

Response (revB, synchronous)

• sn: The serial number of the InvisOutlet.

• packetID: Represents the ID of the packet based on request packetID.

• payload:

  • callbackName: 21

  • callbackArgs:

    • 0: Specifies which device is performing the update; 1 - InvisOutlet, 2 - InvisDeco.

    • 1: Specifies whether the OTA is performed successfully or not; 1 - OTA will continue to perform, 0 - Fail

{
    "sn": "0003C44076",
    "packetID": 414883,
    "payload":
    {
        "callbackName": 21,
        "callbackArgs": [1,1]
    }
}

The device will restart immediately to perform the OTA update.

In order to receive the response, you will need to reconnect the TCP connection again.

The OTA update status will be updated via OTA Download Progress (Synchronous) and OTA Result Update (Synchronous). Please note the packetID will be different then the requested packetID.